• Analogue signal path
• 2 Oscillators (pulse, triangle), sync, FM, noise generator (white, pink), 24 dB filter (switchable between low and high pass) and a VCA
• Dual step sequencer with 8 steps -...
• Limited edition of 200 pieces worldwide with Subtract Edition Custom Label
• Style: S (Small)
• Developed in cooperation with Ed Sheeran and Lowden Guitars
• Bevelled solid spruce top for...
• Up to 16 inputs and outputs simultaneously
• 32 Audio tracks and 64 MIDI tracks
• 32 Instrument and 32 auxiliary tracks
• Contains Artist Bundle with over 100 virtual instruments and effects...
• Supports music streaming services - Beatport ADVANCED, Beatsource, SoundCloud GO+ or TIDAL
• 150 mm jog wheel per deck
• Vinyl feel with pressure detection
• 8 Performance pads per deck to...
• Extensive collection with more than 180 instruments
• From the areas Drums & Percussion, Guitars, Basses, Pianos, Keyboards, Mallets, Pop-Brass, Orchestra, Choir & Vocals, Ethno-Sounds...
• Aluminium housing with sidings in 18mm Plywood with Wengue Veneer
• 4 Rows / 12U
• Width: 197 HP per row (788 HP in total)
• Available depth for modules: 7.5 - 10cm
• 8 Bus boards, each with 19...
• Generates a gate signal and an AD envelope from the user's heartbeat
• Controls for attack, decay, amplitude and offset
• Positive and inverted envelope output
• Trigger output, sensor input
•...
• Voltage controlled signal router
• 2 Channels with 2 inputs each and crossfader
• Stereo master VCA with crossfader and 2 direct inputs
• All three crossfaders with CV input and bipolar...
ADDAC 901TA; Eurorack Case; Aluminium enclosure with sidings in 18mm Plywood with Wengue Veneer; 4 rows / 12U; width: 85 HP per row (340 HP in total); available depth for modules: 7.5 - 10cm; 4...
• Analogue two-channel multimode filter
• Switchable stereo mode
• Per channel: Controls for cutoff and resonance, cutoff CV input with attenuator, audio input and outputs for highpass, bandpass...
• 4-Channel noise source with T-network filter and decay envelope
• Suitable for creating percussion sounds
• Filter frequency and decay time adjustable per channel
• Switchable high-pass filter...
• Aluminium case and wooden sides with wenge veneer
• Carrying handle
• Integrated table stand
• Consists of 2 frames with 2 rows each (2x 6 U)
• Width: 85 U per row (340 U in total)
• Available...
• Simulates the behaviour of a marble on a plate to generate control voltages
• The virtual marble can be influenced via 5 parameters: Movement on X- and Y-axis, rolling speed, rebound behaviour at...
• CV and gate generator
• 4 Independent sine LFOs whose sum results in a complex modulation voltage (Relabi Wave)
• Top and bottom thresholds define threshold values to generate gate signals for...
• 4-Channel quantiser with 10 octaves tuning range
• Keyboard mode - uses the 12 buttons as a keyboard
• Freely definable user scales programmable
• Programmable chord mode
• Adjustable gate time
•...
• 4 Independent channels for controlling drum modules or envelopes
• Each channel converts gate signals into 1ms triggers
• Bypass switch per channel
• Current consumption: 10 mA (+12 V) / 10 mA...
• Stereo FM radio (86-106 MHz)
• Controls for tune and volume
• CV inputs for tune and volume with attenuators (switchable from unipolar to bipolar)
• Station search and direct station selection,...
• Contains 3 channels, each with bipolar attenuator, input, and output
• Input from channel 1 is normalised to inputs 2 and 3
• Current draw: 40 mA (+12 V) / 40 mA (-12 V)
• Width: 4 HP
• Depth: 25 mm
• Allows the use of CV signals on expression pedal inputs of effect devices
• 2 Identical channels, each with CV input (3.5 mm jack), expression output (6.3 mm TRS jack) and attenuator
• Passive...
• CV-controllable signal router
• 2 Signal loops (A&B), each with input and output
• 6 Selectable switching states, selectable via push-buttons, trigger inputs and scroll CV input: bypass, loop...
• Mixer for audio and CV signals
• 2 Independent sections (A & B)
• 2 Signals per section can be mixed, inverted, and rectified
• Bipolar level control per input (X & Y)
• Bipolar amplitude...
• Two-channel DI module with output transformers
• Suitable for adapting Eurorack signals to line level without hum loops
• Per channel: 3.5 mm jack input, 3-way ground lift switch (lift, float,...
• 4-Channel random generator
• Adjustable minimum / maximum values for voltage and time
• CV inputs for all parameters
• Chromatic quantisation switchable
• Normal or Brownian random distribution...
• Desktop tester for Eurorack busboards, bus cables and patch cables
• Two jack sockets for testing patch cables (3.5 mm mono jack)
• Six connectors for testing bus cables with 2x5 pins
• 2x8 Pins...
• 4-Channel CV-Generator
• Simulates orbital movements (water waves) to move 4 virtual buoys on the sea
• The distance between the buoys (relation of the CV outputs), swell (minimum/maximum...
• Stereo matrix mixer with 6 inputs and 6 outputs
• All inputs and outputs can be switched between Eurorack or line level via jumper
• Processes audio signals and control voltages
• Expandable for...
• Two-channel modulation source for random control voltages
• Each channel consists of a random generator that generates smoothed random voltages and interpolates between the random values
•...
• Aluminium case and wooden side panels with Wenge Veneer
• 7 rows / 21 U
• Width: 197 U per row (1379 U total)
• Available installation depth for modules: 6 - 12.5 cm
• 14 bus boards with 14 slots...
• 4-Channel square wave oscillator with FM and multimode filter
• Per channel: Trigger input, adjustable decay envelope, adjustable frequency and switchable FM through the previous oscillator.
•...
• Monophonic synthesizer voice
• VCO with sawtooth/triangle and square waveform and crossfader
• Controls for rough and fine tuning
• Multimode filter (low pass, band pass, high pass) with cutoff...
• Two-channel DI module with input transformers
• Suitable for adapting external signals to Eurorack levels without hum loops
• Per channel gain control, clip LED and 3-way ground lift switch...